Room Code	PREP-IV-I
Net Room Area Briefed	20
Hours of Operation	8am to 8pm, daily
Occupancy	Up to 2
Description / Special Requirements	The Aseptic Room is a clean room designed for sterile medication manufacturing, including intravenous fluid. The room should maintain positive relative pressure and must be accessed via an Anteroom and airlock. Body Protected electrical area Design Considerations include: - Electronic interlock door system should be provided to prevent the opening of both doors in the Anteroom at the same time - Handwashing facilities should be provided immediately outside the Aseptic (Clean) Rooms in the adjoining Anteroom. Hand basins are not to be located within the Aseptic (Clean) Rooms - An intercom system should be provided between Aseptic (Clean) Room and Anteroom - High-resolution CCTV cameras for remote monitoring should be provided - The facility must comply with the room requirements set forth in relevant International Clean Room standards for sterile manufacturing - Work benches are to be freestanding and in stainless steel. Stainless steel trolleys can be provided for minimal storage
Amendment

Fabric and outline specifications

ID	Fabric	Material	Finish	Specification	Selection	Remarks
2000	Skirting	Vinyl	Prefinished	Floor vinyl coved, 150mmH
1708	Doors	Solid Core	Laminate	Single leaf		920mm clear opening
5025	Ceiling	Plasterboard	Paint, epoxy	Flush set, suspended
1000	Floor finish	Vinyl	Standard slip resistant	Seamless, coved		2-coat epoxy paint also acceptable
3000	Wall finish	Paint	Acrylic, washable			2-coat epoxy paint also acceptable
3052	Wall finish	Vinyl	Prefinished	Wall vinyl to 1500mm AFFL		2-coat epoxy paint also acceptable

Fittings and Furniture (FF)

ID	Description	Category	Group	Qty	Selection / Remarks
24101	Waste bin: 120 Litre	Furniture/ Fitting	3	1	stainless steel
8629	Trolley: SS, multi-purpose	MEQ - Furniture	3	1
9007	Stool: adjustable, mobile, high, with backrest	Furniture/ Fitting	3	1
9101	Hatch: pass-through	MEQ - Pharmacy	2	1
8873	Shelving: stainless steel, wire mesh, mobile	MEQ - Sterilisation	3	1
1010	Bench: stainless steel	Metalwork	1	1

Fixtures, Equipment and associated Services (FE)

ID

Description

Grp

Qty

Ele

Data

CdW

HtW

WmW

Tap

Dns

Gas

Selection / Remarks

5855

Clock: electric

1

1

yes

___

___

___

___

___

___

___

8859

Laminar flow hood: horizontal, 1200mm

2

2

yes

___

___

___

___

___

___

___

quantity may change based on operational requirements

Services

ID	Description	Service Category	Qty	Selection / Remarks
1040	Intercom	Communications	1	no handset; Intercom Master Unit
3000	Smoke detectors	Fire Services		and alarm inside room
5040	Pressure: positive	HVAC
2189	General LED	Lighting
2473	Power over Ethernet (PoE)	Power	1	clock
1006	Voice / Data outlet: double	Communications	3	1- bench; 1 per laminar flow hood
2726	PO: UPS, double	Power	2	1 per laminar flow hood
2578	PO: Emergency power, double	Power	1	bench
2190	Air pressure monitoring device	HVAC	1
5005	Air conditioning: special	HVAC		with HEPA filtered
2582	PO: Single	Power	1	hatch (depending on the model)