Print

Store - Sterile Stock, 20m2 (CSSU)

Room Code STSS-20-I
Net Room Area Briefed 20
Hours of Operation 8am to 8 pm daily
Occupancy 1 - 2 intermittently
Description / Special Requirements An area for storage and holding of sterile stock within the Sterile Supply Unit prior to despatch to the Operating Unit or other patient treatment areas. The area may include a workstation bench as required. Sterile stock should be stored in dust free shelving which may include static shelving, mobile shelving or compactus. Shelving used should have a smooth finish to avoid damage to sterilised packs. Structural Engineer's advice should be sought if compactus is to be used (floor load bearing capacity and potential deflection effect on walls, doors, etc). The size and number/ type of shelving may be adapted to suit project specific requirements. Special Design Considerations: - The workstation area may include facilities for instrument scanning and tracking systems - The arrangement and type of shelving should allow for adequate circulation, easy cleaning and rotation of stock - Shelving should comply with relevant OH&S and Ergonomics Regulations and Guidelines - Install compactus units according to manufacturer's specifications.
Amendment 24.10.2010 First Draft 21.04.2011 Room Fabric modified 07.07.2015 Description, Fabric, FF and FE modified 24.06.2019 Room name updated 03.09.2023 RDS updated

Fabric and outline specifications

ID Fabric Material Finish Specification Selection Remarks
1000 Floor finish Vinyl Standard slip resistant Seamless, coved
4031 Wall protection Composite Prefinished PVC Corner guards to 1500mm AFFL as required; other heights also acceptable as per project standardisation
5020 Ceiling Plasterboard Paint, scrub resistant Flush set, suspended
2000 Skirting Vinyl Prefinished Floor vinyl coved, 150mmH
4020 Wall protection Composite Prefinished PVC Crash rail at 900mm AFFL as required
5007 Ceiling Plasterboard Paint Bulkhead above joinery
3010 Wall finish Paint Scrub resistant
2767 Cornice Plasterboard Paint Square set

Fittings and Furniture (FF)

ID Description Category Group Qty Selection / Remarks
1050 Bench: laminate Furniture/ Fitting 1 1 standing height, optional
1950 Chair: ergonomic, high Furniture/ Fitting 3 1 to workstation bench, optional
4460 Cupboard: wall mounted Furniture/ Fitting 1 1 over bench, optional
8873 Shelving: stainless steel, wire mesh, mobile MEQ - Sterilisation 3 10 dust free, static shelving, mobile shelving or compactus
8620 Trolley: instrument MEQ - Furniture 3 2 for dispatch to Operating Unit
9191 Trolley: collection/ distribution, closed, 1200W MEQ - Sterilisation 3 2

Fixtures, Equipment and associated Services (FE)

ID Description Grp Qty Ele Data CdW HtW WmW Tap Dns Gas Selection / Remarks
10132 Clock: master clock 3 1 yes opt ___ ___ ___ ___ ___ ___
54510 Telephone: handset, standard 3 1 ___ yes ___ ___ ___ ___ ___ ___ to bench, optional
9517 Incubator: biological indicator, steriliser 3 2 yes ___ ___ ___ ___ ___ ___ ___ one for steam steriliser and one for low temperature steriliser
11400 Computer: PC & monitor 3 1 yes yes ___ ___ ___ ___ ___ ___
9023 Tracking system: instrument tray 3 0 yes yes ___ ___ ___ ___ ___ ___ optional

Services

ID Description Service Category Qty Selection / Remarks
1006 Voice / Data outlet: double Communications 1 to bench
5005 Air conditioning: special HVAC HEPA filtered
5040 Pressure: positive HVAC
2189 General LED Lighting
6055 Special: task light, built in Lighting under O/H cupboards, to workstation
2577 PO: Double Power 3 to bench
1080 Clock: master clock Communications 1 battery/ POE/ electrical connection TBC